Solid Level-Fix, 250 Clips 3-12 mm / 1 mm thickness

When laying larger or thin tiles, small height differences between the tiles quickly occur, which are visible and noticeable afterwards. Clips that are placed under the tile edge and secured prevent this. This means you need to make fewer corrections during the work.

What to look for with level fix clips

First look at the joint width you want to maintain. These clips are suitable for 3 to 12 mm, so for both narrow and wider joints. The thickness of 1 mm is the dimension of the part that will sit between the tiles. Also check how many clips you need: the quantity depends on the size of the tiles and the number of corners and edges you need to support.

How to work with a leveling system

You spread the adhesive bed, lay the tile and place the clips under the corners or along the edges of two adjoining tiles. Then secure the tiles with the matching tool of the system, so the surfaces lie level. Let the adhesive cure fully according to the instructions of the adhesive manufacturer before removing the system.

Useful for tiling and renovation

A leveling system is widely used by tilers and DIY enthusiasts who want a tight, flat end result. It is especially useful for floors and walls where light shows height differences clearly. Optionally combine the clips with tile spacers and other products from the tile products category for a complete approach.

Frequently asked questions

How many clips are in one package?

One package contains 250 clips, suitable for joints of 3 to 12 mm.

For which joint width are these clips intended?

They are intended for joint widths between 3 and 12 mm, with a thickness of 1 mm.

Can I combine the clips with tile spacers?

Yes, you can. Tile spacers determine the distance between the tiles, while the clips help keep the height of adjoining tiles level.