Level-Fix clips 3-12 mm, 2 mm thickness (250 pieces)

The clips set the tiles at the desired joint width and keep the edges at the same height while the tile adhesive or rapid-set cement cures. This saves correction work afterwards and prevents edges that you could trip over later or that catch the light.

Who are level fix clips useful for?

The system is especially useful for larger tile formats and for floors where a flat surface is important. Both professionals and DIYers who are serious about tiling can benefit from it. For small mosaic tiles or very uneven substrates, a different approach is often better.

What joint width can you use the clips for?

These clips work for joints of 3 to 12 mm. Choose the joint width based on the type of tile, the design and the manufacturer's advice. If you want a narrower or wider joint, look for a clip size that suits it. Also pay attention to the thickness of the clip, here 2 mm, so that it fits the build-up of your tiling.

What should you look out for when choosing and using them?

First check that the substrate is flat and clean, as the clips do not correct large differences in height. Determine in advance how many clips you need: count on several clips per tile, depending on the size. A pack of 250 therefore covers a limited number of square metres. For installation you also need a suitable system to tighten the clips. Check the specifications to see whether it is supplied separately.

Which products do you use with them?

For a complete tiling project you need, besides the clips, tile adhesive or rapid-set cement, and possibly joint tape and tile spacers for places where clips are not needed. In the same category you will find tile products that go with these.

Frequently asked questions

How many clips do I need per tile?

That depends on the tile size and the location. With larger tiles you usually place several clips along the edges and at the corners. Also consult the manufacturer's instructions.

Can I also use these clips for wall tiles?

In many cases you can, as long as the joint width is between 3 and 12 mm and the substrate is suitable. If in doubt, check this beforehand.

Are the clips reusable?

This is not stated in the product data. Consult the packaging or the manufacturer for use after curing.