Rapid 19 staples 37/6 mm, 5000 pieces

The staples are used for mechanical fastening: a quick way to secure light materials without glue, screws or nails. On this page you can read what to consider when choosing and using them.

Which machine are these Rapid 19 staples intended for?

The designation 37/6 mm belongs to the RAPID 19. Before you order, check the type and size listed on your machine or in the manual. Staples of a different size or type often do not fit and can jam in the magazine. If you are unsure, compare the designation on your old packaging with SKU FR 01741019 or ask Proffix.

Leg length and application

With a leg length of 6 mm, these staples are suitable for light fastening on relatively thin or soft surfaces. Think of securing foil, textile, cardboard or thin sheet material. For thicker or harder materials you usually need longer staples or a heavier fastening method. Choose the length so the staple holds firmly without going through the material.

Practical tips for stapling

Hold the machine straight and press it firmly against the workpiece before firing the staples. This way they are driven evenly into the material. For hard material, first test on a scrap piece to see whether the staple sinks in properly. Always wear work gloves and eye protection when stapling, and keep the boxes dry so the staples do not rust.

Packaging and reordering

The staples are packed in packs of 5000 pieces, which is handy for those who work regularly or use several machines. The item is in stock and can be reordered, so you do not run out in the middle of a job.

Frequently asked questions

How many staples are in one pack?

One pack contains 5000 staples of type 37/6 mm.

Do these staples fit every Rapid staple gun?

They are intended for the RAPID 19. For other models, always check the type and size in your machine's manual.

What does 6 mm mean for these staples?

That is the leg length of the staple, so how deep it is driven into the material.