Wera 867/4 IMP DC SB Impaktor TORX® Bits, TORX 30 x 50 mm

The number 30 refers to the size of the profile, the 50 mm to the length of the bit. The bit fits in a standard bit holder or in the chuck of an impact driver. For a good fit, the size of the bit must match the screw head exactly, so first check which TORX size the screw has.

For which job do you use a Torx 30 impact bit?

An impact bit is intended for machines that deliver short, powerful impacts while rotating. This is mainly the case when tightening larger screws in wood or metal, and when loosening screws that are stuck. A regular bit is often less suitable for this load, as it can wear out or be damaged more quickly. Check the product information to see whether the bit suits the work you want to do.

What does the length of 50 mm mean?

With 50 mm you can also reach screws that sit deeper in the material, or where a component is in the way. A longer bit offers more reach, while a shorter bit usually sits more stably in the machine. For work in hard-to-reach places, the length is therefore a practical choice, while for regular screwing a shorter bit is often sufficient.

How to choose the right bit

First look at the profile and size of the screw head. A bit that does not fit exactly increases the risk of slipping and of damaging the screw. Also pay attention to the type of machine you work with and the length required. If you are unsure, you can ask Proffix by phone or email which bit fits best.

Frequently asked questions

Can I also use this bit in a regular cordless screwdriver?

That depends on the drive of your machine. The bit has a standard holder connection, but always check whether the connection fits your machine.

How do I know if I need TORX 30?

Hold the bit against the screw head or look at the marking on the packaging or on the screw. The bit should fit firmly and without play.

Is the item available for immediate delivery?

The product page shows how many pieces are in stock. If an item is not in stock, it can be ordered on request.